Industry · Pumps & Fluid Systems
Built for
Flow, Pressure
& Sealing.
Impellers, casings, covers, valve parts, gland components, brackets, and machined assemblies for pump and fluid system OEMs. Amsol supports components where geometry, sealing faces, corrosion resistance, and pressure-side machining decide performance.
CF8M impellers
WCB casings
Pressure-tested routes
Investment cast · sand cast · CNC
Hero Photo
Pump casing / impeller / fluid system component
900×900px · industrial lighting · dark background
Pump casing / impeller / fluid system component
900×900px · industrial lighting · dark background
CF8M
Impellers & Wet Parts
WCB
Pump Casings
CNC
Sealing Face Control
Component Mapping
Pump & Fluid System Components Amsol Supplies
Cast, machined, forged, and fabricated components for centrifugal pumps, industrial pumps, valves, fluid handling systems, and process equipment.
Pump Casings
WCB / cast iron / CF8M · sand cast · CNC machined flanges and faces
Impellers
SS316 / CF8M · investment cast · flow geometry · balanced machining route
Valve Bodies
WCB / CF8M / SG iron · cast · machined sealing areas · pressure-duty
Gland & Seal Components
SS304 / SS316 · precision machined · sealing tolerance · corrosion-resistant
Pump Covers & End Plates
Cast iron / SG iron · machined faces · bolt-hole pattern accuracy
Bearing Housings
Grey iron / SG iron · machined bearing seats · concentricity control
Mounting Brackets & Base Plates
MS / cast iron · fabricated or cast · drilled · coated
Small Flow Components
Investment cast stainless · thin-wall · complex internal geometry
ACTIVE SUPPLY Currently shipping to active OEM customers
LAUNCHING First order confirmed — entering serial production
PROPOSING Ready to quote — submit drawing for assessment
Why Amsol for Pumps & Fluid Systems
Three Reasons Pump OEMs Choose Amsol
Pump OEMs need casting discipline, sealing-face accuracy, and material compatibility for pressure-side components, wet parts, and fluid handling assemblies.
01 / 03
Flow Geometry Through the Right Casting Route
Pump parts often include curved blades, internal cavities, thin sections, and pressure-side features. Amsol can route the component through investment casting or sand casting based on geometry, weight, volume, and finish requirement.
✓ Amsol’s industry anchor lists CF8M impellers and WCB casings for pumps and fluid systems.
02 / 03
Sealing Faces Controlled After Casting
The casting makes the shape. Machining makes the seal. Amsol manages both so flanges, gland areas, bearing seats, covers, and valve faces are finished to functional drawing requirements.
✓ Casting + CNC route for pump and valve components.
03 / 03
Material Compatibility for Fluid Duty
Water, chemicals, slurry, oil, and process fluids all demand different material logic. Amsol supports CF8M, SS316, WCB, cast iron, SG iron, and coated fabricated components depending on corrosion, pressure, temperature, and wear.
✓ Material and process matching available through Amsol’s multi-process supply system.
Supply Capability
Explore Amsol capabilities →
Casting + Machining Support for Pump and Fluid System Components
Pump and fluid system parts demand more than a raw casting. Flow geometry, pressure-duty material selection, machining allowance, sealing faces, and inspection discipline all influence final performance. Amsol supports these components through investment casting, sand casting, CNC machining, fabrication, and finishing routes.
CF8M
Wet Parts
WCB
Casings
CNC
Sealing Faces
Multi
Process Routes
Material Capability
Pumps & Fluid Systems-Specific Material Grades
CF8M / SS316
Investment Casting + CNC
ProcessInvestment Casting + CNC
UseImpellers, valve parts, wet components
Corrosion resistance and fluid compatibility
WCB / Carbon Steel
Sand Casting + CNC
ProcessSand Casting + CNC
UsePump casings, valve bodies, pressure parts
Industrial pressure service
Grey Iron / SG Iron
Sand Casting + CNC
ProcessSand Casting + CNC
UseBearing housings, covers, pump bodies
Machinability, vibration control, cost-effective production